维护铜关公的方法

在我国人民的心目当中关公是骁勇讲义气，忠正不二的形象，很是受人们喜欢，所以现在的我们会看到关公铜像被摆放在各种场所，尤其是室外的关公如果仔细观察，还会发现上面有绿锈，因此铸铜关公的维护也是使用过程中很重要的一个环节，主要注意以下五个方面的问题。

In the eyes of our people, Guan Gong is a brave, loyal and loyal image, which is very popular. So now we will see Guan Gong's bronze statue placed in various places, especially outdoor Guan Gong. If you carefully observe it, you will find green rust on it. Therefore, the maintenance of the cast copper Guan Gong is also an important link in the use process, focusing on the following five aspects.

1.铸铜关公的摆放环境需求保持枯燥，无尘埃和空气污染物。温度在18℃-24℃之间，相对湿度在40%-50%之间。

1. The placing environment of cast copper Guan Gong needs to be kept dry and free of dust and air pollutants. The temperature is between 18 ℃ and 24 ℃, and the relative humidity is between 40% and 50%.

2.铸铜关公需求防止有害的化学物质，如酸、油脂、氯化物等。搬动铜工艺品时要戴上棉丝手套，不要用手直接接触，防止被手上的汗水腐蚀。不要用油腻的纸或盒子包装。

2. Copper casting officials need to prevent harmful chemicals, such as acid, grease, chloride, etc. When moving copper handicrafts, you should wear cotton gloves and do not touch them directly with your hands to prevent them from being corroded by sweat on your hands. Do not use greasy paper or boxes for packaging.

3.铸铜关公表面的尘埃要用洁净柔软的布擦拭洁净，需求特别护理的部分(容易破碎和软弱)要用软刷刷掉或许用吸尘器吸走或吹掉。

3. The dust on the surface of the cast copper gate shall be wiped with a clean and soft cloth, and the parts that need special care (easy to be broken and weak) shall be brushed off with a soft brush or vacuumed or blown off with a vacuum cleaner.

4.为防止铸铜关公被机械损坏，应防止相互磕碰，不要堆叠和堆叠，并应留意保持精致和容易损坏的铜工艺品。

4. In order to prevent the cast copper Guan Gong from being damaged by machinery, it is necessary to prevent collision with each other, do not stack and stack, and pay attention to keeping delicate and easily damaged copper handicrafts.

5.铸铜关公放置时间过长后，根据放置的环境或多或少会出现一些板滞现象。这个时候可以用棉绢布来回擦拭。

5. After the cast copper Guan Gong has been placed for a long time, there will be some stagnation more or less according to the placing environment. At this time, you can use cotton cloth to wipe back and forth.